industry sourcing
Would you like to react to this message? Create an account in a few clicks or log in to continue.

UVC-only SiC Based UV Photodiode With Standard DVGW W294 - SG01D-C18

Go down

UVC-only SiC Based UV Photodiode With Standard DVGW W294 - SG01D-C18 Empty UVC-only SiC Based UV Photodiode With Standard DVGW W294 - SG01D-C18

Post by Admin Tue Feb 21, 2017 1:04 am


UVC-only SiC Based UV Photodiode With Standard DVGW W294 - SG01D-C18
Properties of the SG01D-C18 UV photodiode

• UVC-only sensitivity, compliant with DVGW W294, PTB reported high chip stability

• Active Area A = 0,50 mm2

• TO18 hermetically sealed metal housing, 1 isolated pin and 1 case pin

• 10µW/cm2 peak radiation results a current of approx. 6 nA

Model Number: SG01D-C18

UVC-only SiC Based UV Photodiode With Standard DVGW W294 - SG01D-C18 555c2e8fafd92
Product Specification
SG01D-C18

UVC-only SiC based UV photodiode A = 0,50 mm2




1.General Features:
Properties of the SG01D-C18 UV photodiode

• UVC-only sensitivity, compliant with DVGW W294, PTB reported high chip stability

• Active Area A = 0,50 mm2

• TO18 hermetically sealed metal housing, 1 isolated pin and 1 case pin

• 10µW/cm2 peak radiation results a current of approx. 6 nA



2.About the material Silicon Carbide (SiC)

SiC provides the unique property of extreme radiation hardness, near-perfect visible blindness, low dark current,

high speed and low noise. These features make SiC the best available material for visible blind semiconductor UV de-

tectors. The SiC detectors can be permanently operated at up to 170°C (338°F). The temperature coeffcient of signal

(responsivity) is also low, < 0,1%/K. Because of the low noise (dark current in the fA range), very low UV radiation

intensities can be measured reliably. Please note that this device needs an appropriate amplifer (see typical circuit

on page 3).

Options

SiC photodiodes are available with seven different active chip areas from 0,06 mm2 up to 36 mm2. Standard version

is broadband UVA-UVB-UVC. Four fltered versions lead to a tighter sensitivity range. All photodiodes have a hermeti-

cally sealed metal housing (TO type), either a 5,5 mm diameter TO18 housing or a 9,2 mm TO5 housing. Further op-

tion is either a 2 pin header (1 isolated, 1 grounded) or a 3 pin header (2 isolated, 1 grounded).



UVC-only SiC Based UV Photodiode With Standard DVGW W294 - SG01D-C18 555c2e2bb4467
UVC-only SiC Based UV Photodiode With Standard DVGW W294 - SG01D-C18 555c2e2c344d6
UVC-only SiC Based UV Photodiode With Standard DVGW W294 - SG01D-C18 555c2e2c74287




Admin
Admin

Posts : 27
Join date : 2016-11-28

https://industrysourcing.rpg-board.net

Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum